AirLive WL-5460AP v2 User Manual 1 WL-5460AP 54Mbps Multi-Function Wireless AP User’s
AirLive WL-5460AP v2 User Manual 11 Item # Function Description A Power Adaptor
AirLive WL-5460AP v2 User Manual 12 1.3.3 Configuration Setups The factory default settings of WL-5460AP are as following: Settings Default Value De
AirLive WL-5460AP v2 User Manual 13 匡Check the LED: The Power and LAN # LED should be
AirLive WL-5460AP v2 User Manual 14 2. Operation Mode The WL-5460AP device provides all 8 modes of wireless operational applications with: Mode Radi
AirLive WL-5460AP v2 User Manual 15 2.1 Change Operation Mode WL-5460AP is default in
AirLive WL-5460AP v2 User Manual 16 2.2 About the Operation Modes This device provides four operational applications with Access Point, Bridge, Client
AirLive WL-5460AP v2 User Manual 17
AirLive WL-5460AP v2 User Manual 18 2.2.2 Client Mode If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s c
AirLive WL-5460AP v2 User Manual 19 2.2.3 Bridge Mode The WDS (Wireless Distributed Sy
AirLive WL-5460AP v2 User Manual 20 2.2.4 WDS Repeater Refer to the illustration below. While acting as Bridges, AP1 (with Station 1 being associated
AirLive WL-5460AP v2 User Manual 2 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, trans
AirLive WL-5460AP v2 User Manual 21 2.2.5 Universal Repeater An universal repeater can
AirLive WL-5460AP v2 User Manual 22 2.2.6 WISP (Client Router) mode In WISP mode, the AP will behave just the same as the Client mode for wireless fun
AirLive WL-5460AP v2 User Manual 23 2.2.7 WISP + Universal Repeater mode In this mode,
AirLive WL-5460AP v2 User Manual 24 2.2.8 Gateway (AP + Router) In this mode, router functions are added between one Ethernet port and the other netwo
AirLive WL-5460AP v2 User Manual 25 3. Wireless Settings This section guides you to co
AirLive WL-5460AP v2 User Manual 26 referred to as a network name because essentially it is a name that identifies a wireless network. In this mode, t
AirLive WL-5460AP v2 User Manual 27 3.2 Client Mode Settings Ø Alias Name: Another
AirLive WL-5460AP v2 User Manual 28 Ø Channel Number: Allow user to set the channel manually or automatically. If set channel manually, just select t
AirLive WL-5460AP v2 User Manual 29 3.3 Bridge Mode Settings Ø Alias Name: Another
AirLive WL-5460AP v2 User Manual 30 and choose the channel with best situation for communication. The number of channels supported depends on the regi
AirLive WL-5460AP v2 User Manual 3 Table of Contents 1. Introduction ...
AirLive WL-5460AP v2 User Manual 31 3.4 WDS Repeater Mode Settings Ø Alias Name: An
AirLive WL-5460AP v2 User Manual 32 The default is 2.4GHz (B+G) mode. Ø SSID (Network ID): Provide SSID for wireless client survey and connection. Th
AirLive WL-5460AP v2 User Manual 33 To configure the access control, please refer to S
AirLive WL-5460AP v2 User Manual 34 3.5 Universal Repeater Mode Settings Ø Alias Name: Another name for WL-5460AP. Ø Disable Wireless LAN Interfac
AirLive WL-5460AP v2 User Manual 35 Ø Channel Number: Allow user to set the channel m
AirLive WL-5460AP v2 User Manual 36 3.6 WISP Mode Settings Ø Alias Name: Another name for WL-5460AP. Ø Disable Wireless LAN Interface: Check the b
AirLive WL-5460AP v2 User Manual 37 Ø WAN Port: WL-5460AP provides 4 methods for clie
AirLive WL-5460AP v2 User Manual 38 Ø Special Application: This is to enable internet service such as sound, video and so on. The routing firewall of
AirLive WL-5460AP v2 User Manual 39 3.7 WISP + Universal Mode Settings Ø Alias Name
AirLive WL-5460AP v2 User Manual 40 referred to as a network name because essentially it is a name that identifies a wireless network. In this mode, t
AirLive WL-5460AP v2 User Manual 4 1. Introduction 1.1 Overview AirLive WL-5460AP is an IEEE802.11b/g compliant 11 Mbps & 54 Mbps Ethernet Wireles
AirLive WL-5460AP v2 User Manual 41 Ø Virtual Server: You can use Virtual Server S
AirLive WL-5460AP v2 User Manual 42 Ø DMZ: You can use DMZ Settings to provide connection on internet. For example, you can have your own web server
AirLive WL-5460AP v2 User Manual 43 3.8 Gateway Mode (AP + Router) Settings Important
AirLive WL-5460AP v2 User Manual 44 Ø Band: You can choose one mode of the following you need. ¤ 2.4GHz (B): 802.11b supported rate only. ¤
AirLive WL-5460AP v2 User Manual 45 Ø Virtual Server: You can use Virtual Server S
AirLive WL-5460AP v2 User Manual 46 Ø DMZ: You can use DMZ Settings to provide connection on internet. For example, you can have your own web server
AirLive WL-5460AP v2 User Manual 47 3.9 Wireless Security Here you can configure the s
AirLive WL-5460AP v2 User Manual 48 WPA-PSK (TKIP) / WPA-PSK (AES) Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) provides better security tha
AirLive WL-5460AP v2 User Manual 49 WPA2-PSK (AES) Enter the Pre-shared Key to initiat
AirLive WL-5460AP v2 User Manual 50 802.1X (Radius) Authentication by the remote server (RADIUS Server). Security: You can select None, WEP, WPA
AirLive WL-5460AP v2 User Manual 5 Application Example 1 Example 2
AirLive WL-5460AP v2 User Manual 51 ¤ Port: Enter the RADIUS Server’s port number pro
AirLive WL-5460AP v2 User Manual 52 3.10 Advanced Wireless Settings When click on Advanced Setup button under client mode, a pop-up window appears an
AirLive WL-5460AP v2 User Manual 53 transmission. It will also confirm the requestor s
AirLive WL-5460AP v2 User Manual 54 select a level to make sure that the output power measured at the antenna end will not exceed the legal limit in y
AirLive WL-5460AP v2 User Manual 55 3.11 Access Control When Enable Wireless Access Co
AirLive WL-5460AP v2 User Manual 56 3.12 QoS Traffic Control What is Traffic Control QoS? Traffic Control is a great tool to control the bandwidth of
AirLive WL-5460AP v2 User Manual 57 1. LAN Output Rate: This is the speed of the traf
AirLive WL-5460AP v2 User Manual 58 Configure the Traffic Control QoS From the Mode Setting page, please choose the “Traffic Control(QoS)” on the bott
AirLive WL-5460AP v2 User Manual 59 Interface Control Settings: In the Interface C
AirLive WL-5460AP v2 User Manual 60 3. Enter “1024” for the “WLAN Out Rate” 4. Enter “VIP Subscriber” for the “Comment” 5. Click on “Save” button 6
AirLive WL-5460AP v2 User Manual 6 1.2 Firmware Features AirLive Wireless AP Firmware Features Firmware e11: The Most Powerful AP Firmware Ever! WL-
AirLive WL-5460AP v2 User Manual 61 D. Bandwidth Control by MAC address You can set t
AirLive WL-5460AP v2 User Manual 62 Application Example Example1: AP Mode Traffic Control In this example, the AP is installed outdoor to provide Int
AirLive WL-5460AP v2 User Manual 63 3. Please enable the “MAC Control” 4. Please f
AirLive WL-5460AP v2 User Manual 64 Example2: Client Mode Traffic Control In the following example, the AP is used as the wireless client to the WISP
AirLive WL-5460AP v2 User Manual 65 4. System Management 4.1 LAN Interface Setup In
AirLive WL-5460AP v2 User Manual 66 Clone MAC Address: You can specify the MAC address of your Access Point to replace the factory setting. 4.2 Upg
AirLive WL-5460AP v2 User Manual 67 4.3 Save / Reload Settings This function enables
AirLive WL-5460AP v2 User Manual 68 Reset: Click to restore the default configuration. 4.4 Change Password For secure reason, it is recommended that y
AirLive WL-5460AP v2 User Manual 69 4.5 Enable System Log This function can list all
AirLive WL-5460AP v2 User Manual 70 4.6 NTP Settings This function can set system time from local computer or Internet. Current Time: Setting sys
AirLive WL-5460AP v2 User Manual 7 Traffic Control QoS Function Traffic Control is a g
AirLive WL-5460AP v2 User Manual 71 5 System Recovery WL-5460AP provides the system re
AirLive WL-5460AP v2 User Manual 72 4. While pressing and holding the Reset button of WL-5460AP, connect WL-5460AP to its power supply. Keep holding
AirLive WL-5460AP v2 User Manual 73 7. Open the WL-5460AP configuration menu and cho
AirLive WL-5460AP v2 User Manual 74 6. Specification Feature AP, Bridge, Client, Repeater functions WISP Client Router mode WISP + Universal Repeate
AirLive WL-5460AP v2 User Manual 75 To configure the WISP mode, you PC must be conne
AirLive WL-5460AP v2 User Manual 8 Telnet Function Some WISP operators prefer to use CLI command line for configurations. The latest e11 firmware p
AirLive WL-5460AP v2 User Manual 10 1.3.2 Hardware Presentation LED # Display Color Indication 1 Power Green Lights on when the device is pow
Kommentare zu diesen Handbüchern