Air Live WHA-5500CPE Bedienungsanleitung

WHA-5500CPE-NT 108Mbps 802.11a/b/g Multi-Function Outdoor AP Firmware Version V.2 User’s Manual

1. IntroductionAirLive WHA-5500CPE-NT User’s Manual 41.4 Features  Atheros AR-2313 + AR-5112 108mbps 802.11a/b/g chipset 4MB Flash and 32MB SDRAM 8

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 94  set security <ssid> wep <key number> <64|128|152> <ascii

6. Command Line Interface 95 AirLive WHA-5500CPE-NT User’s Manual 6.5 Enable/Disable Commands Commands to enable or disable settings

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 966.6 Add/Delete Commands Commands to add or delete settings  ( add/delete ): ad

6. Command Line Interface 97 AirLive WHA-5500CPE-NT User’s Manual <mapping sub-ioctl set_threslower to cmd 0x8BE0-76> <mappi

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 98<mapping sub-ioctl cwmin to cmd 0x8BE3-1> <mapping sub-ioctl cwmax to cmd

6. Command Line Interface 99 AirLive WHA-5500CPE-NT User’s Manual  add ssid <ssid name> broadcast <enable | disable>

7. Application Example: Infrastructure AirLive WHA-5500CPE-NT User’s Manual 100 In this chapter, you will learn how to utilize WHA-5500CPE-NT

7. Application Example: Infrastructure 101 AirLive WHA-5500CPE-NT User’s Manual Device B: WHA-5500CPE-NT in Bridge Infrastructure Mod

7. Application Example: Infrastructure AirLive WHA-5500CPE-NT User’s Manual 1027.2.1 Device A Wireless Settings Step 1 Click on “setup” button on

7. Application Example: Infrastructure 103 AirLive WHA-5500CPE-NT User’s Manual Step 3 Click on the “Security Settings”. Then cho

1. Introduction 5 AirLive WHA-5500CPE-NT User’s Manual 1.5.2 Repeater Mode In Repeater mode, the WHA-5500CPE-NT functions as a repe

7. Application Example: Infrastructure AirLive WHA-5500CPE-NT User’s Manual 104 7.2.2 Device A Bandwidth Management This purpose is to limit the

7. Application Example: Infrastructure 105 AirLive WHA-5500CPE-NT User’s Manual 3. Enter “for client” in description 4. Select “IP

7. Application Example: Infrastructure AirLive WHA-5500CPE-NT User’s Manual 1067.3 Device B: Bridge Infrastructure Mode The configuration setti

7. Application Example: Infrastructure 107 AirLive WHA-5500CPE-NT User’s Manual Step 2 Enter the Network ID(SSID) and distance infor

7. Application Example: Infrastructure AirLive WHA-5500CPE-NT User’s Manual 108 7.3.2 Device B Total Bandwidth Control Step 1 Select “Bandwidth

7. Application Example: Infrastructure 109 AirLive WHA-5500CPE-NT User’s Manual 7.4 Device C: Client Infrastructure Mode Device C:

7. Application Example: Infrastructure AirLive WHA-5500CPE-NT User’s Manual 1107.4.2 Device C Wireless Settings Step 1 Go to “Operation Mode” menu

7. Application Example: Infrastructure 111 AirLive WHA-5500CPE-NT User’s Manual Step 3 Press “Site Survey” button, the following pag

8. Application Example2: Bridge Network AirLive WHA-5500CPE-NT User’s Manual 112 Before reading this chapter, please read section 4.3 first on

8. Application Example2: Bridge Network 113 AirLive WHA-5500CPE-NT User’s Manual More than 60% of First Fresnel Zone must be cleared

1. Introduction AirLive WHA-5500CPE-NT User’s Manual 6Chapter 9 for step-by-step application example of this operation mode. 1.5.4 Bridge Infras

8. Application Example2: Bridge Network AirLive WHA-5500CPE-NT User’s Manual 11411. For multi-point connection, use bandwidth control to manage th

8. Application Example2: Bridge Network 115 AirLive WHA-5500CPE-NT User’s Manual use WEP encryptions policy.  Bridge Infrastructur

8. Application Example2: Bridge Network AirLive WHA-5500CPE-NT User’s Manual 116 When you require more advance security like WPA and WPA2 TIPS:

8. Application Example2: Bridge Network 117 AirLive WHA-5500CPE-NT User’s Manual ask you to select which key to use. You can selec

8. Application Example2: Bridge Network AirLive WHA-5500CPE-NT User’s Manual 118 The following table will be displayed to show the added WDS links:

8. Application Example2: Bridge Network 119 AirLive WHA-5500CPE-NT User’s Manual WDS Bridge 2 Settings 1. Enter the WEP Encryption

8. Application Example2: Bridge Network AirLive WHA-5500CPE-NT User’s Manual 120. WDS Bridge 3 Settings 1. Enter the WEP Encryption Keys.

8. Application Example2: Bridge Network 121 AirLive WHA-5500CPE-NT User’s Manual 4. Setup the PING watchdog. Please setup the P

9. Application Example3: Routers and Repeater AirLive WHA-5500CPE-NT User’s Manual 122 In this chapter, you will learn how to use Repeater mod

9. Application Example3: Routers and Repeater 123 AirLive WHA-5500CPE-NT User’s Manual 9.2 WHA-5500CPE-NT in WISP Router Mode The fol

1. Introduction 7 AirLive WHA-5500CPE-NT User’s Manual 1.5.5 Client Infrastructure Mode This mode is also known as “Client” mode.

9. Application Example3: Routers and Repeater AirLive WHA-5500CPE-NT User’s Manual 124 Step 2 Go to “System Configurations -> Device IP settin

9. Application Example3: Routers and Repeater 125 AirLive WHA-5500CPE-NT User’s Manual Step 5 Click on “Apply”. After a few second

9. Application Example3: Routers and Repeater AirLive WHA-5500CPE-NT User’s Manual 126 Step 2 On the WAN port setting pave, Enter the Static IP i

9. Application Example3: Routers and Repeater 127 AirLive WHA-5500CPE-NT User’s Manual Step 4 Select “FTP” for Service Name. En

9. Application Example3: Routers and Repeater AirLive WHA-5500CPE-NT User’s Manual 128 9.3 WHA-5500CPE-NT in Repeater Mode The following is the con

9. Application Example3: Routers and Repeater 129 AirLive WHA-5500CPE-NT User’s Manual Step 2 Click on the “Setup” button and the w

9. Application Example3: Routers and Repeater AirLive WHA-5500CPE-NT User’s Manual 130 Step 5 Click on “Apply”. After a few seconds, the followi

10. Emergency Firmware Recovery 131 AirLive WHA-5500CPE-NT User’s Manual The WHA-5500CPE-NT features an Emergency Recovery func

10. Emergency Firmware Recovery AirLive WHA-5500CPE-NT User’s Manual 1322. Set the PC as TFTP server, IP address of PC is 192.168.1.254, subnet

10. Emergency Firmware Recovery 133 AirLive WHA-5500CPE-NT User’s Manual 8. Power on the WHA-5500CPE-NT again. If firmware crashe

1. Introduction AirLive WHA-5500CPE-NT User’s Manual 8 1.5.7 WISP Router Mode In WISP Router Mode, WHA-5500CPE-NT connects to the remote Access Poi

11. Frequent Asked Questions AirLive WHA-5500CPE-NT User’s Manual 134 In this chapter, we will address some frequent asked questions about W

11. Frequent Asked Questions 135 AirLive WHA-5500CPE-NT User’s Manual please enable “WDS Dynamic” on Mikrotik’s “AP Bridge” mode.

11. Frequent Asked Questions AirLive WHA-5500CPE-NT User’s Manual 136 ==================================================================== Ques

12. Specifications137 AirLive WHA-5500CPE-NT User’s Manual The specification of WHA-5500CPE-NT is subject to change without notice. Please use the i

12. Specifications AirLive WHA-5500CPE-NT User’s Manual 138 12.2 Radio Specifications 12.2.1 Frequency Band  USA (FCC) 11 Channels: 2.412GHz

12. Specifications 139 AirLive WHA-5500CPE-NT User’s Manual  Super-G mode  Turbo-G mode  11a mode  SuperA without Turbo  SuperA

12. Specifications AirLive WHA-5500CPE-NT User’s Manual 140 Noise Immunity  Multiple SSID and Tag VLAN  QoS (802.11e WMM)  Wi-Fi, WPA c

13. Wireless Network Glossary 141 AirLive WHA-5500CPE-NT User’s Manual The wireless network glossary contains explanation or in

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 142802.11d Also known as “Global Roaming”. 802.11d is a standard for use i

13. Wireless Network Glossary 143 AirLive WHA-5500CPE-NT User’s Manual Adhoc A Peer-to-Peer wireless network. An Adhoc wireless n

1. Introduction 9 AirLive WHA-5500CPE-NT User’s Manual

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 144 Bootloader Bootloader is the under layering program that will start at th

13. Wireless Network Glossary 145 AirLive WHA-5500CPE-NT User’s Manual Dynamic Domain Name System. An algorithm that allows the us

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 146 ESSID (SSID) The identification name of an 802.11 wireless network. Si

13. Wireless Network Glossary 147 AirLive WHA-5500CPE-NT User’s Manual integrates NAT, firewall, bandwidth management, and other secu

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 148LACP (802.3ad) Trunking The 802.3ad Link Aggregation standard defines how

13. Wireless Network Glossary 149 AirLive WHA-5500CPE-NT User’s Manual Packet A unit of data sent over a network. Passphrase Used

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 150ADSL modem. Preamble Type Preamble are sent with each wireless packet tr

13. Wireless Network Glossary 151 AirLive WHA-5500CPE-NT User’s Manual connection using NAT technology. A wireless router is a dev

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 152Subnet Mask An address code mask that determines the size of the network.

13. Wireless Network Glossary 153 AirLive WHA-5500CPE-NT User’s Manual UDP User Datagram Protocol. A layer-4 network protocol for

2. Install the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 102 2. Installing the WHA-5500CPE-NT This section describes the hardware features

13. Wireless Network Glossary AirLive WHA-5500CPE-NT User’s Manual 154108-bit (128-bit) or 152-bit (Atheros proprietary) encryption modes. W

13. Wireless Network Glossary 155 AirLive WHA-5500CPE-NT User’s Manual WPA Wi-Fi Protected Access. It is an encryption standard

2. Install the WHA-5500CPE-NT 11 AirLive WHA-5500CPE-NT User’s Manual 2.2 Package Content The WHA-5500CPE-NT package contains the fol

2. Install the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 12 3. Turn the WHA-5500CPE-NT to another side, the RJ-45 jack is at the middle of

2. Install the WHA-5500CPE-NT 13 AirLive WHA-5500CPE-NT User’s Manual 7. Scroll up 4 screws well. Be careful, this is very important;

Copyright and Disclaimer AirLive WHA-5500CPE-NT User’s Manual Copyright & Disclaimer No part of this publication may be reproduced in any form or

2. Install the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 142.3.1 Mounting Configuration Your WHA-5500CPE-NT comes standard with 2 plastic s

2. Install the WHA-5500CPE-NT 15 AirLive WHA-5500CPE-NT User’s Manual 2.3.2 Antenna polarization  Pease install the CPE in the

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 16 The WHA-5500CPE-NT offers many different types of management interfa

3. Configuring the WHA-5500CPE-NT 17 AirLive WHA-5500CPE-NT User’s Manual 3.2 Prepare your PC The WHA-5500CPE-NT can be managed remot

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 18 Secured Web Management (HTTPS): HTTPS is also using web browser for con

3. Configuring the WHA-5500CPE-NT 19 AirLive WHA-5500CPE-NT User’s Manual Command Line Interface (Telnet): WHA-5500CPE-NT can be

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 20This procedure is not necessary in most cases unless there is a router/fire

3. Configuring the WHA-5500CPE-NT 21 AirLive WHA-5500CPE-NT User’s Manual  Firefox: 1. Select “or you can add an exception” 2.

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 22 3.4.2 Welcome Screen and Login After the procedure above, the Welcome Scr

3. Configuring the WHA-5500CPE-NT 23 AirLive WHA-5500CPE-NT User’s Manual firmware, backup configuration, settings PING watchdog, and

Table of Contents i AirLive WHA-5500CPE-NT User’s Manual Table of Contents 1. Introduction ...

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 24 Language Menu: You can select the language from the right side of main m

3. Configuring the WHA-5500CPE-NT 25 AirLive WHA-5500CPE-NT User’s Manual Follow the example below to change to “Client Infrastructu

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 263.5.3 Change the Country Code The legal frequency and channels in 5GHz

3. Configuring the WHA-5500CPE-NT 27 AirLive WHA-5500CPE-NT User’s Manual 3.5.4 Set the Time and Date It is important that you se

3. Configuring the WHA-5500CPE-NT AirLive WHA-5500CPE-NT User’s Manual 28 3.5.6 Change Password You should change the password for WHA-5

4. Web Management-Wireless and WAN Settings 29 AirLive WHA-5500CPE-NT User’s Manual In this chapter, we will explain about t

4. Web Management-Wireless and WAN SettingsAirLive WHA-5500CPE-NT User’s Manual 30 Device Status: This section for monitoring the status of WHA-5500C

4. Web Management-Wireless and WAN Settings31 AirLive WHA-5500CPE-NT User’s Manual Once you click on the “Setup” page, the wireless settings will app

4. Web Management-Wireless and WAN SettingsAirLive WHA-5500CPE-NT User’s Manual 32 Disable SSID Broadcast: If you check this box, the SSID will be hi

4. Web Management-Wireless and WAN Settings33 AirLive WHA-5500CPE-NT User’s Manual RSSI value, the smaller the absolute value is, the stronger the si

Table of Contents AirLive WHA-5500CPE-NT User’s Manual ii3.5.5 Change System Management...

4. Web Management-Wireless and WAN SettingsAirLive WHA-5500CPE-NT User’s Manual 34• SuperA: Super-A add Bursting, Compression, and Fast Frames to incr

4. Web Management-Wireless and WAN Settings35 AirLive WHA-5500CPE-NT User’s Manual  Bursting: Allow more data frame to be sent over given period

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 36140 5700 149 5745 153 5765 157 5785 U-NII Upper 161 5805 ISM 165

4. Web Management-Wireless and WAN Settings 37 AirLive WHA-5500CPE-NT User’s Manual note not all security policies are available in a

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 38ASCII Characters if you choose this option. For example, “passw”

4. Web Management-Wireless and WAN Settings 39 AirLive WHA-5500CPE-NT User’s Manual WPA, WPA2, WPA-AUTO Wi-Fi Protected Access (WPA)

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 40  Pre-shared Key: This is an ASCII string with 8 to 63 char

4. Web Management-Wireless and WAN Settings 41 AirLive WHA-5500CPE-NT User’s Manual You can adjust the transmit output power of the W

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 42transmission. Any unicast (data or control) frames larger than sp

4. Web Management-Wireless and WAN Settings 43 AirLive WHA-5500CPE-NT User’s Manual correct value for you.  Enable Radio eXtended

Table of Contents iii AirLive WHA-5500CPE-NT User’s Manual 5.1.7 Configuration Save and Restore ...

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 44  Disable MAC address control list: When selected, no MAC addre

4. Web Management-Wireless and WAN Settings 45 AirLive WHA-5500CPE-NT User’s Manual Configuring the Multiple SSID When you c

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 46 How to Modify or Delete a SSID Please follow the procedure bel

4. Web Management-Wireless and WAN Settings 47 AirLive WHA-5500CPE-NT User’s Manual Configure the VLAN and DiffServ Markings When yo

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 48 DSCP Value: When you select “Best Effort” DSCP Type, you ca

4. Web Management-Wireless and WAN Settings 49 AirLive WHA-5500CPE-NT User’s Manual Configure the WMM QoS Parameters  AC Type

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 50timer to determine the amount of time to wait before attempting t

4. Web Management-Wireless and WAN Settings 51 AirLive WHA-5500CPE-NT User’s Manual  AIFS The Arbitration Inter-Frame Spacing (AI

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 52 4.2.17 RADIUS Settings Operation Mode -> Setup -> RADIUS

4. Web Management-Wireless and WAN Settings 53 AirLive WHA-5500CPE-NT User’s Manual 4.2.18 Bandwidth Control Operation Mode ->

Table of Contents AirLive WHA-5500CPE-NT User’s Manual iv9.2 WHA-5500CPE-NT in WISP Router Mode ...123 9.2.1 WISP

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 54will easy the loading on the AP for bandwidth management. To b

4. Web Management-Wireless and WAN Settings 55 AirLive WHA-5500CPE-NT User’s Manual units.  Uplink Max: Enter the speed you wish

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 56  Example 2: Per User Bandwidth Control In this example, the WH

4. Web Management-Wireless and WAN Settings 57 AirLive WHA-5500CPE-NT User’s Manual 4.3 WDS Settings Operation Mode -> Setup -

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 58  WEP Key: You can set up to 4 keys, each key can have diffe

4. Web Management-Wireless and WAN Settings 59 AirLive WHA-5500CPE-NT User’s Manual side of the link. z Press Add to finish

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 60 4.4.2 AP Router Mode In AP Router mode, the POE port of the WHA-

4. Web Management-Wireless and WAN Settings 61 AirLive WHA-5500CPE-NT User’s Manual 4.4.3 WAN Port Settings Operation Mode -> Se

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 62to clone the MAC address. Please check the “Clone MAC address”

4. Web Management-Wireless and WAN Settings 63 AirLive WHA-5500CPE-NT User’s Manual  HTTPS Web server Access: You can enable or

1. Introduction 1 AirLive WHA-5500CPE-NT User’s Manual 1 1. Introduction 1.1 Overview The WHA-5500CPE-NT is a wireless outdoor multi-

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 64Select the routing protocol scheme used for the router’s LAN / WA

4. Web Management-Wireless and WAN Settings 65 AirLive WHA-5500CPE-NT User’s Manual 4.4.8 Multiple DMZ Advanced Settings >> Mul

4. Web Management-Wireless and WAN Settings AirLive WHA-5500CPE-NT User’s Manual 66 4.4.10 Special Applications Advanced Setting >> Special

4. Web Management-Wireless and WAN Settings 67 AirLive WHA-5500CPE-NT User’s Manual 4.4.11 IP Filtering Settings Advanced Setting>

5. Web Management2: System Configuration, Tools and Status AirLive WHA-5500CPE-NT User’s Manual 68 In this chapter, we will explain about S

5. Web Management2: System Configuration, Tools and Status 69 AirLive WHA-5500CPE-NT User’s Manual Assign Static IP to the Device

5. Web Management2: System Configuration, Tools and Status AirLive WHA-5500CPE-NT User’s Manual 705.1.2 Time Settings System Configuration ->Ti

5. Web Management2: System Configuration, Tools and Status 71 AirLive WHA-5500CPE-NT User’s Manual 5.1.4 System Management System Co

5. Web Management2: System Configuration, Tools and Status AirLive WHA-5500CPE-NT User’s Manual 72Syslog server IP address: System event messages

5. Web Management2: System Configuration, Tools and Status 73 AirLive WHA-5500CPE-NT User’s Manual 5.1.6 Firmware Upgrade System Con

1. Introduction AirLive WHA-5500CPE-NT User’s Manual 2If time permitted, you should read through the entire chapter.  4.2 Operation Mode (wireless)

5. Web Management2: System Configuration, Tools and Status AirLive WHA-5500CPE-NT User’s Manual 74 Step 2 Enter the path of the configuration fi

5. Web Management2: System Configuration, Tools and Status 75 AirLive WHA-5500CPE-NT User’s Manual 5.2 Tools 5.2.5 Network Ping Ple

5. Web Management2: System Configuration, Tools and Status AirLive WHA-5500CPE-NT User’s Manual 76

5. Web Management2: System Configuration, Tools and Status 77 AirLive WHA-5500CPE-NT User’s Manual 5.3 Device Status When you click

5. Web Management2: System Configuration, Tools and Status AirLive WHA-5500CPE-NT User’s Manual 78 5.3.2 Wireless Information This page shows the

5. Web Management2: System Configuration, Tools and Status 79 AirLive WHA-5500CPE-NT User’s Manual 5.3.4 Wireless Client Table This

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 80 In this chapter, we will explain commands that are available through Telnet i

6. Command Line Interface 81 AirLive WHA-5500CPE-NT User’s Manual  ftptest <ssid> 11a <channel>  Purpose: Test if

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 82  signal survey <bssid> <channel>  Purpose : Display continuo

6. Command Line Interface 83 AirLive WHA-5500CPE-NT User’s Manual  Example: Command> z_debug add ssid air1  z_debug reboot

1. Introduction 3 AirLive WHA-5500CPE-NT User’s Manual  Chapter 8: Application Example 2: WDS Bridge This chapter tells you the basi

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 84  show upnp  Purpose: Show UPnP information  Example: Command> show upn

6. Command Line Interface 85 AirLive WHA-5500CPE-NT User’s Manual hello 00-4f-62-24-12-34  show radius server  Purpo

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 86Command> show system System Name: WHA-5500CPE-NT ---------------------------

6. Command Line Interface 87 AirLive WHA-5500CPE-NT User’s Manual  show wireless security  Purpose: Show current wireless securi

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 886.4 Set Commands The Set Commands are to make changes to the WHA-5500CPE-NT’s sett

6. Command Line Interface 89 AirLive WHA-5500CPE-NT User’s Manual Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_ahb.o <mapping

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 90  set client isolation <enable | disable>  Purpose: Enable or Disable

6. Command Line Interface 91 AirLive WHA-5500CPE-NT User’s Manual DNS server : 168.95.1.1  set <enable | disable>

6. Command Line Interface AirLive WHA-5500CPE-NT User’s Manual 92  set beacon interval <range:20-100>  Purpose: set beacon interval for

6. Command Line Interface 93 AirLive WHA-5500CPE-NT User’s Manual Command> set age out time 5 Radio1 age out time: 5  set t